| Body material : | Cast Aluminum |
| Power supply: | 5V/80MAH Mono crystalline silicon |
| Battery: | Lithium battery3.2V/1000MAH |
| LED: | 3pcs/side φ10mm super brightness LED |
| LED Color: | White Green Red Yellow Blue |
| Flashing model: | flashing or constant |
| Working hours: | 180 hrs for flashing modes,40hrs for steady modes |
| Visual distance: | 1000m(approx) |
| Waterproof: | IP68 |
| Load capacity | >40T(can be installed in the middle of road) |
| Size: | Ф120*50mm（bottom） Ф135*50mm（upper） |
| Weight： | 700g |
| Life span: | 3-5 years with battery |
| Working Temperature | -25 °C~ + 75°C |
| waterproof | IP68 |
Metal Road Stud with shank, tested and passed by SABS, Supplied and installed anywhere in South Africa with 3 year warranty on material and installation for only R 140.00 excl VAT. We will supply and install any one of our Metal Road Studs, KT-303 , KT-304 and KT-30 5 anywhere in South Africa and then guarantee the stud and the
SolarVision develops and manufactures road construction Solar Road Studs, for the marking of pedestrian crossings, roundabouts, traffic islands etc. Our products are made of active shining LED light source and are fully autonomous over several years.
The advantages of solar road stud: 1. High brightness. The brightness of ordinary reflective road stud is only 300 MCD to 400 MCD, while the brightness of led solar road stud can be up to 2000 MCD, 6 to 7 times of the former. The high brightness light from the led road stud can penetrate fog at night to guide the driver safely and effectively. 2.
The solar road stud is a unique innovative and state – of – the – art road safety device, powered by the sun. It provides a clear visible traffic guidance round the year. These studs function automatically from dusk to
Road Stud – Plastic – 10 x 10 x 2cm This road stud is made from high quality ABS plastic, and is highly reflective on both sides. It has dimensions of 10 x 10 x 2cm. Function The reflective road stud is placed in the road to mark the edge of a lane or other section.
The stud can take up to 15 tons compression resistance and is fitted with three LED lights to make it visible from up to 700 m away. Solar Stone Studs. The round clear design of the Solar Road Stud creates a good appearance while relieving the impact from traffic load and indicating hazardous areas and traffic circles. Available in 360 degrees.
Road Stud – Plastic – 3 15/16″ x 3 15/16″ x 25/32″ This road stud is made from high quality ABS plastic, and is highly reflective on both sides. It has dimensions of 3 15/16″ x 3 15/16″ x 25/32″. Function The reflective road stud is placed in the road to mark the edge of a lane or other section.
The solar road stud is a unique innovation that is powered by the sun during day time and provides clear visible traffic guidance. Safety studs function automatically from dusk to dawn. Advantages of Plastic Road Studs
Bl-A06-03lz Solar LED Embedded Road Stud Min. Order: 500 Pieces Bl-A06-05lq High Quality LED Underground Lights/ Ground Buried Lighting with Lowest Price Ce RoHS Approved, Embedded LED Road Stud
Australian Bollards solar powered road studs suit a wide variety of requirements, with SRS300 surface mounted products. Driving at night can be particularly hazardous, with over fatalities every day, many more serious injuries are possible especially in areas where street lighting is either unavailable, not cost effective or environmentally not
SERNIS is a Portuguese technologic solutions company, based in Braga, which manufactures and supplies a wide range of products, services and a high quality solutions in the areas of Road Safety, LED Lighting, Electronics Displays and Fiber Optics.
Advantage Of Popular Solar Road Stud. 1.Attractive appearanceand and bright color 2.It can stand the impact and the roll from the vehicle tires 3.Good ability of reflection :the reflector creates an effect of diamond,it is so attractive under the lights that the drivers can feel the reflection at 150-200m far away,and warning the drivers.
China Road Stud manufacturers – Select 2020 high quality Road Stud products in best price from certified Chinese Solar Stud manufacturers, Road Reflectors suppliers, wholesalers and factory on Made-in-China.com
Find High reflective solar road stud plastic cat eyes 3m road studs from China Manufacturer, Manufactory, Factory and Supplier – Shenzhen Zhongtian New Energy Technology Co., Ltd. on ECVV.com
The Solar Road Stud (SRS) is an LED based product, designed to dramatically improve road safety for night-time driving. The bright flashing LEDs are highly effective at getting the attention of the drivers -much earlier than conventional (reflective) road studs.
