| Body material : | Cast Aluminum |
| Power supply: | 5V/80MAH Mono crystalline silicon |
| Battery: | Lithium battery3.2V/1000MAH |
| LED: | 3pcs/side φ10mm super brightness LED |
| LED Color: | White Green Red Yellow Blue |
| Flashing model: | flashing or constant |
| Working hours: | 180 hrs for flashing modes,40hrs for steady modes |
| Visual distance: | 1000m(approx) |
| Waterproof: | IP68 |
| Load capacity | >40T(can be installed in the middle of road) |
| Size: | Ф120*50mm（bottom） Ф135*50mm（upper） |
| Weight： | 700g |
| Life span: | 3-5 years with battery |
| Working Temperature | -25 °C~ + 75°C |
| waterproof | IP68 |
Flush Type Solar Road Studs For Freeways The use of solar road studs with active LED lighting is much more efficient than conventional glass reflectors.
Oct 19, 2022 · To achieve solar road markers installed on the zebra crossing, the first need to consider is that the solar road marker cannot affect the normal driving of pedestrians and vehicles, so flush type solar road marker is the best choice, for this kind of solar road marker, compression is one of the important performance, the stress resistance must be above 30 tons, can be installed on the zebra crossing, the solar road marker can be solar power supply, it can also be the wiring, they can use
Flush Type Solar Road Studs For FreewaysWith almost 20 years of experience, we deliver high-quality traffic & Safety Solutions。 NOKIN Offer High-quality LED Solar Road Stud lights Email: info@nk-roadstud.com
Solar Markers holds the most solar-powered road marker patents in the USA, Europe, Australia, South America, and Korea. 10211 Pacific Mesa Blvd, Suite 407, San Diego, CA 92121 Tel. 1.858.457.9600
Solar led pathway marker road stud light dock driveway path warning. Of solar recessed 8 inch deck dock patio pathway light w/ 8 white led. Solar power led outdoor garden pathway plug in lawn light. 2pack solar power spot light outdoor pathway garden landscape led. Mcc 2pcs round ball led garden solar power light outdoor lawn backyard pathway lamp.
The RoadStar Internally Illuminated Solar Pavement Levelled Markers/Studs Flush Type GI05 Bi-Directional products are road-safety devices that can be used to maintain safety and provide adequate road-marking in roadway systems which will facilitate the efficient movement of traffic for the transportation of people and goods.
The flush type solar led road stud is produced by mould in one punch, with no need to assemble, which greatly improves its load capability. Solar battery, electronic component and LED indicators are sealed in solar road studs with a special technique, the road stud is strictly waterproof, which can be used on ponding roads in the long run.
Bright – Our solar powered road markers output 48 lumens, which allows for roadway guidance without being a visual distraction. Easy to install – SLD solar road markers come as a flush mount model or with a spigot, allowing for easy installation with only a drill and epoxy. Covered by warranty – We offer a 2-year warranty on our solar road markers.
flush type solar road markers IP68 UAE IP68 Reflective Solar Road Stud LED Flashing Road Marker High Quality Aluminum IP68 Led Solar Road Stud – Extripod Supply1. High reflective, meet EN1463 standard. 2. Larger LED Source lighting , over 1000 meter visible . 3. Giant solar .
Solar Road Stud Circuit Schematic. Solar Panel: A 3V/100 mA (0.3W) rated solar panel is used here. Such panels are widely available at a cost less than $2. Output of the solar panel (SP1) is directly connected to the re-chargeable cell (B1) through an ordinary silicon diode 1N4007 (D1). Re-chargeable battery: The power back-up mechanism is
The RoadStar Internally Illuminated Solar Pavement Levelled Markers/Studs Flush Type GI05 Bi-Directional products are road-safety devices that can be used to maintain safety and provide adequate road-marking in roadway systems which will facilitate the efficient movement of traffic for the transportation of people and goods.
Internally Illuminated Solar Pavement Levelled Marker Flush Type. Solar Pavement Levelled Markers improve road usage by improving the driver’s ability to identify/navigate hazardous areas compared to using traditional road studs for the safety of the user. This is enhanced by the fact that solar road studs come in a variety of colors and can be used to identify various hazards on the road.
The RoadStar Internally Illuminated Solar Pavement Levelled Markers/Studs Flush Type GI05 Bi-Directional products are road-safety devices that can be used to maintain safety and provide adequate road-marking in roadway systems which will facilitate the efficient movement of traffic for the transportation of people and goods.
Raised solar road stud NK-RS-A6-1Verify the bottom of the solar road marker is firmly installed on the installation surface allowing for zero “surface float” to occur.(space betwe Email: info@nk-roadstud.com Whatsapp: +86-13602600950 Chat Now
flush type solar road markers with 6 bolts Durbanflush type solar road markers with 6 bolts Durban. Body material: PC Power supply: Solar panel (Monocrystalline 2.5V /0.2W) Batter
