Body material : | Cast Aluminum |
Power supply: | 5V/80MAH Mono crystalline silicon |
Battery: | Lithium battery3.2V/1000MAH |
LED: | 3pcs/side φ10mm super brightness LED |
LED Color: | White Green Red Yellow Blue |
Flashing model: | flashing or constant |
Working hours: | 180 hrs for flashing modes,40hrs for steady modes |
Visual distance: | 1000m(approx) |
Waterproof: | IP68 |
Load capacity | >40T(can be installed in the middle of road) |
Size: | Ф120*50mm(bottom) Ф135*50mm(upper) |
Weight: | 700g |
Life span: | 3-5 years with battery |
Working Temperature | -25 °C~ + 75°C |
waterproof | IP68 |
SolarVision develops and manufactures road construction Solar Road Studs, for the marking of pedestrian crossings, roundabouts, traffic islands etc. Our products are made of active shining LED light source and are fully autonomous over several years. All products
Regulations require active emergency lighting in all road tunnels over 500m and there are special provisions for guidance to allow tunnel users to evacuate the tunnel on foot. The Regulations also indicate that Horizontal signing delineation should be at the road side edge, at emergency exit door marker lights as well as overhead illuminated lane and variable message signage.
Solar Road Side Stud The scope of application of Solarmarker extends from simple obstacle marking to complex, optical road guidance tasks. Through the solar power supply an enormous autonomy can be achieved. An expensive and complex cabling falls away.
Reflective G105 underground led cat eyes raised pavement marker light Embedded solar road studs Solar Road Solar Road Stud Aluminum $14.11 – $15.50 / Piece 100 Pieces (Min. Order) Quote Now Best value Led Road Studs – Great deals on Led Road
Solar Studs Smart, safe and sustainable solar powered road studs, proven to increase night time road safety. Providing a view of the road layout ahead in the driver’s natural line of vision and well beyond the headlight beam of a vehicle.
Road Studs Coming Soon ROAD STUDS SR-90 is an intelligent system for physical speed reduction of vehicles in controlled speed zones. The system has a speed meter installed that will activate the Road Studs. SR-90 – the winner of the Safety Category of
Solar Road Stud SV 1 Solar Road Stud SV 2 Solar Road Stud SV 3 LED Flexpole (development status) Applications Technology Single solar cell changeable Lamp-Unit Micro Controller Wireless Installation Uni- and bi-directional with different colours of LEDs
SR-T24_Bidirectional with Lines. SR-T24_Unidirectional. View more. Add to Compare. TECHNICAL FEATURES. Road stud specially developed for tunnels. Robust construction. High brightness during day and night. Possibility of connection of N elements.
Superior solar energy. Ideally suited to centre line and slip road use. Low profile of less than 4mm above the road surface. Smart, safe and sustainable solar powered road studs, proven to increase night time road safety. Providing a view of the road layout ahead
These LED road studs are powered by solar energy captured from natural sunlight by the in-built solar panel and stored in the stud’s internal battery. As a result of this active light output, they deliver 10 x greater visibility of the road layout ahead than the traditional retro-reflective road markings, giving drivers up to 900m visibility.
Solar road studs are flashing solar cell powered LED maintenance-free lighting devices used in road construction to delineate road edges and centrelines. Embedded in the road surface, Solar Road Studs are an electronic improvement on the traditional cat’s eyes in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective
manufacturer,supplier & factory in china. Grlamp is a professional supplier of solar road stud and obstruction lights established in 2104. The company’s product positioning is mid-to-high-end, and all product design solutions insist on high-quality products with price advantages and use the best products and prices to serve our customers.
The RoadStar Internally Illuminated Solar Pavement Levelled Markers/Studs Flush Type GI05 Bi-Directional products are road-safety devices that can be used to maintain safety and provide adequate road-marking in roadway systems which will facilitate the efficient
1/5/2008 · The solar powered road studs are ‘hard wired’ to traffic control rooms and are illuminated during times of congestion, directing traffic from the motor way’s entry-ramp to the hard shoulder. The illuminated studs delineate the additional lane and also guide drivers onto the main carriageway when the plus-lane system is not in use.
3/5/2012 · LED road studs provide tunnel guidance LED road studs provide tunnel guidance Safety in tunnels is of paramount importance, and in 2014 the European Union will be introducing new safety rules for such structures. As in other parts of the world, many tunnels